# Ping (ICMP)

> How to allow and restrict ping to your server's address from the internet.

By default, ping (ICMP echo) from the internet does not reach any of your addresses. You can open it yourself: to everyone or only from addresses you choose. This is useful for monitoring services such as uptime checks.

## Which addresses

- The server's own IPv4 address: static or free IP. Ping is forwarded to the server you choose, and the server itself replies.
- The server's IPv6 address, if IPv6 is active.
- Ping cannot be opened on the shared address, because it cannot point to a single server.

## How to open it

1. Open the **Network** page.
2. In the **Ping (ICMP)** section, click **Change** on the row of the address you need.
3. Choose a mode: **Closed**, **Open to everyone** or **Only from selected addresses**.
4. For an IPv4 address, choose the server in **Server that replies**.
5. If you chose **Only from selected addresses**, enter one IPv4 or IPv6 address or network (CIDR, e.g. 203.0.113.0/24) per line in **Allowed addresses**. Up to 20 addresses.
6. Click **Save**. The change reaches the firewall within a few seconds; meanwhile the row shows **Applying**.

To close ping, choose **Closed** in the same window.

## IPv6

This section manages only ping (echo). Other ICMPv6 messages that IPv6 needs to work (neighbor discovery, "packet too big" and so on) are always allowed and are not touched.

## If ping does not reply

- If the row shows **Error**, contact support with the reference code.
- The server's own firewall may block ping. On Windows Server ping is blocked by default: enable the "File and Printer Sharing (Echo Request - ICMPv4-In)" rule (ICMPv6-In for IPv6).
- On Linux with `ufw` or `firewalld`, check that ICMP echo is allowed.

---

Source: https://jezahost.com/en/help/vps/ping
Updated: 2026-11-15
Portal: https://cloud.jezahost.com/network
